Licensing

VPGate drivers are licensed by specific categories. The APX™ Mobile via Outpost driver is a Category A license allocated on a per endpoint basis.

The base VPGate license size represents the maximum number of endpoints that can be active at any one time on a single VPGate. The base license is available in several sizes: 24, 40, 80, or 160 endpoints. To use more endpoints, you need additional VPGate licenses.

VPGate License

Model Number

Total
Category A&B Endpoints

Maximum
SIP Endpoints
(Category B)

Redundant

SFW-VPG-L0-NR
SFW-VPG-L0-NR-SK

24 12 No
SFW-VPG-L0
SFW-VPG-L0-SK
24 12 Yes
SFW-VPG-L1
SFW-VPG-L1-SK
40 20 Yes
SFW-VPG-L2
SFW-VPG-L2-SK
80 40 Yes
SFW-VPG-L3
SFW-VPG-L3-SK
160 100 Yes

The APX™ Mobile via Outpost driver must include an Outpost driver in its driver chain. For every APX™ Mobile driver used, an Outpost driver must also be used.

For example, if you purchase a Level 1 license (40 endpoints) and are using 10 APX™ Mobile endpoints, you are using 10 A licenses for the APX™ Mobile via Outpost drivers and 10 A licenses for the Outpost drivers. This configuration uses 20 A licenses from your total of 40 Level 1 licenses.

NOTES

  • Each APX™ P25 control station radio requires an Outpost (OUTPOST-2R) and an Outpost cable kit (OUTPOST- APX) which includes a software license. The cable is included at no charge.
  • If your requirements include two APX™ control station radios at a single physical location, the two radios can share one Avtec Outpost.