Specifications

Interface Type: T1

Cisco IOS Software Release: 16.6.3

Compliance: FCC Class A device, CE

Safety Conformance: UL60950

Address Signaling Formats: In-band DTMF

Signaling Modes: Loop start, ground start, wink start

Battery Polarity Reversal Detection: Detection of disconnect supervision and far-end answer supervision via battery polarity reversal

MTBF: 587,250 hours

Codecs Supported: G.729 and G.711 uLaw

Echo Cancellation: Up to 128 ms

Warranty: 1 year

Physical

Unit Dimensions (HxWxD): 1.73 in × 17.25 in × 19.97 in (4.39 cm × 43.82 cm × 50.72 cm)

Rack Height: 1 RU (rack unit)

Maximum Weight: 16.1 lb (7.3 kg)

Airflow: I/O side to bezel side

Physical Connector: 2 RJ45 ports

Number of Connectors/Ports: 1

Operating Temperature: 32°F – 104°F (0°C – 40°C)

Operating Humidity: 5% – 85% non-condensing

 
Power

AC Power: 100-240 volts AC autoranging

AC Input Frequency: 47 to 63 Hz

AC Input Current Range AC Power Supply (Maximum): 3 to 1.3A

AC Input Surge Current: 60 A peak and less than 5 Arms per half cycle

Maximum Power with AC Power Supply (Watts): 250

 
Regulatory Compliance

Safety: UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1

EMC: 47 CFR, Part 15 ICES-003 Class A EN55032 Class A CISPR32 Class A VCCI V-3 CNS 13438 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 KN22, KN24

Telecom: TIA-968 -B CS-03 ANSI T1.101 ITU-T G.823, G.824, IEEE 802.3 RTTE Directive

Environmental: RoHS Compliant (Restriction of Hazardous Substances)

 
Supported Standards

Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03

A full list of specifications for the Cisco 4331 Integrated Services Router can be found on the Cisco website.